Home > Automation Equipment > Valve Product Series > Non-Atomization Spray Valve

Automation Equipment
Non-atomization Spray Valve

Click to view large picture of product

Product Model:AT-C5
Product Description:T-C5 non-atomization spray valve is suitable for low viscosity fluids, especially for the application of solvent materials. Due to the special structural design of nozzle, the glue will be sprayed at a very low pressure.
  • Product Features
  • Technical Specification
  • Quality Assurance
  • Data Download

Introduction:

AT-C5 non-atomization spray valve is suitable for low viscosity fluids, especially for the application of solvent materials. Due to the special structural design of nozzle, the glue will be sprayed at a very low pressure. Accordingly, the working component will be coated before the spaying glue reaches its atomization point. The utilization ratio of glue can be 99% or above. Because the forming of thin film is completely controlled by the nozzle's fluid channel design, we offer different controllable types of nozzle to meet the demands of customer for different width and thickness ratio of coating. The AT-C5 is mainly used in coating machines.

 

Application Areas:

Mainly used in medical equipment, electronics & appliances, communication devices, automobile parts, etc.

 

Product Features:

1、With special fluid channel design, the adhesive coating resembling curtain shape instead of atomization.
2、Improve the ratio of glue utilization through preventing the forming of air bubbles.

 

Exterior Dimensional Drawing:

Outer Dimension(L*W*H)=172.5*25.0*26.5 mm


 

Pre:Nothing
Next model:Nothing